AT: Tenergy 7.4V 800mAh LiPo Rechargeable Battery Pack w/ PCB

AT: Tenergy 7.4V 800mAh LiPo Rechargeable Battery Pack w/ PCB

add to cart

AT: Tenergy 7.4V 800mAh LiPo Rechargeable Battery Pack w/ PCB

SKU:
P/N 31145
|

SKU:
31145
Category:
Battery Pack
Cell Size:
Prismatic
Brand:
Tenergy
Chemistry:
Li-Po
Voltage (V):
7.4V
Capacity(mAh):
800
Series Config.:
2S
Parallel Config.:
1P
Watt Hours:
5.92
Discharge Current:
1.5
Connector:
Bare Leads
Length:
67
Width:
40
Height:
13

price: $28

instant savings: $ 0.00

you pay:$28.00
saved: $0
x

Sales Tax

Tenergy only collects sales tax on orders shipped to addresses in the States of California.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

Order Now! Build Lead Time: 3-7 Business Days

product highlights

  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.
  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.

Applications:

  • HID bike light or dive light.
  • Autonomous submarine.
  • RC Car and RC airplane with greater energy needs.
  • Building external battery packs for Laptop computers or 12V portable devices.

Specifications:

  • Voltage 7.4V (nominal)
  • Capacity 800mAh+-5%
  • Max. Discharge Rate 1.5Amp
  • Over Charge Cut-off 8.4V
  • Over Discharge Cut-off 5.5V
  • Over Current Protection 1-4A
  • Dimension 67x40x13mm
  • Weight 43g
  • Wire Length 100mm

Warning:

  • Improper use like overcharging and over discharging can cause explosion and/or fire.
  • User of the battery is required to have sufficient Li-polymer charging experience and technical knowledge.
  • Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding, or abuse of this product.
 
 
show moreshow less

product highlights

  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.
  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.

Applications:

  • HID bike light or dive light.
  • Autonomous submarine.
  • RC Car and RC airplane with greater energy needs.
  • Building external battery packs for Laptop computers or 12V portable devices.

Specifications:

  • Voltage 7.4V (nominal)
  • Capacity 800mAh+-5%
  • Max. Discharge Rate 1.5Amp
  • Over Charge Cut-off 8.4V
  • Over Discharge Cut-off 5.5V
  • Over Current Protection 1-4A
  • Dimension 67x40x13mm
  • Weight 43g
  • Wire Length 100mm

Warning:

  • Improper use like overcharging and over discharging can cause explosion and/or fire.
  • User of the battery is required to have sufficient Li-polymer charging experience and technical knowledge.
  • Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding, or abuse of this product.
 
 

product highlights

  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.
  • 7.4V 800mAh LiPo Battery Pack.
  • Include PCB Protection installed to limit discharge current of battery pack to 3Amp; protect battery from short circuit & wrong polarity.
  • Prewired & shrink wrapped.
  • If you connect two of these modules in parallel, you can build a 7.4V 1.75Ah Battery Pack with a 1.7 Amp discharge rate.

Applications:

  • HID bike light or dive light.
  • Autonomous submarine.
  • RC Car and RC airplane with greater energy needs.
  • Building external battery packs for Laptop computers or 12V portable devices.

Specifications:

  • Voltage 7.4V (nominal)
  • Capacity 800mAh+-5%
  • Max. Discharge Rate 1.5Amp
  • Over Charge Cut-off 8.4V
  • Over Discharge Cut-off 5.5V
  • Over Current Protection 1-4A
  • Dimension 67x40x13mm
  • Weight 43g
  • Wire Length 100mm

Warning:

  • Improper use like overcharging and over discharging can cause explosion and/or fire.
  • User of the battery is required to have sufficient Li-polymer charging experience and technical knowledge.
  • Tenergy or All-Battery.com are not responsible for any damage or injury caused by misuse, misunderstanding, or abuse of this product.