Protection Circuit Module [PCB] for 11.1V (3S) Li-ion Battery Pack (Cutoff 15A)

Protection Circuit Module [PCB] for 11.1V (3S) Li-ion Battery Pack (Cutoff 15A)

add to cart

Protection Circuit Module [PCB] for 11.1V (3S) Li-ion Battery Pack (Cutoff 15A)

SKU:
P/N 32071

SKU:
32071

Special Order - Minimum Order Quantity 1K+

saved: $0
x

Sales Tax

Tenergy only collects sales tax on orders shipped to addresses in the States of California.

You may be responsible for state and local sales/use taxes when filing your tax returns. Please check your local sales tax laws.

Order now to ship in 1 Business Day

product highlights

  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.
  • Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells
  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells

Connection Instruction:

  • B+: Connected to the third battery's positive terminal.
  • B1-: Connected to the second battery's positive terminal.
  • B2-: Connected to first the battery's positive terminal.
  • B-: Connected to the first battery's negative terminal.
  • P+: Connected to the battery's output or the charger's positive terminal.
  • P-: Connected to the battery's output or the charger's negative terminal.

Product Specifications:

ItemContentCriterion
Over Charge Protection
  • Over charge detection voltage
  • Over charge release voltage
  • 4.2±0.025V
  • 4.1±0.050V
Over Discharge Protection
  • Over discharge detection voltage
  • Continuous charge current
  • Continuous discharge current
  • 2.5±0.080V
  • 4A
  • 4A
Over Current Protection
  • Over current detection current
  • 15A±3A
Short Circuit Protection
  • Over discharge detection voltage
  • Release condition
  • 8.6±0.300V
  • Disconnect Load
Interior Resistance Main loop electrify resistance ≤70mΩ
Current Consumption Current consume in normal operation ≤100µA
Dimension (L*W*H) 50x17x1mm

Application Notes:

  • Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.
  • Please use the compatible charger for your battery pack; pay special attention to your input and output voltage current to avoid PCB damage.
  • When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.
  • Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.
  • Without the written agreement from us, please do not use this PCB for application in medical instruments, emergence devices, auto, airspace vehicles, or other devices that might have impact on human body.

Warning:

  • Because of the very high energy density, Li-ion battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.
 
 
 
show moreshow less

product highlights

  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.
  • Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells
  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells

Connection Instruction:

  • B+: Connected to the third battery's positive terminal.
  • B1-: Connected to the second battery's positive terminal.
  • B2-: Connected to first the battery's positive terminal.
  • B-: Connected to the first battery's negative terminal.
  • P+: Connected to the battery's output or the charger's positive terminal.
  • P-: Connected to the battery's output or the charger's negative terminal.

Product Specifications:

ItemContentCriterion
Over Charge Protection
  • Over charge detection voltage
  • Over charge release voltage
  • 4.2±0.025V
  • 4.1±0.050V
Over Discharge Protection
  • Over discharge detection voltage
  • Continuous charge current
  • Continuous discharge current
  • 2.5±0.080V
  • 4A
  • 4A
Over Current Protection
  • Over current detection current
  • 15A±3A
Short Circuit Protection
  • Over discharge detection voltage
  • Release condition
  • 8.6±0.300V
  • Disconnect Load
Interior Resistance Main loop electrify resistance ≤70mΩ
Current Consumption Current consume in normal operation ≤100µA
Dimension (L*W*H) 50x17x1mm

Application Notes:

  • Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.
  • Please use the compatible charger for your battery pack; pay special attention to your input and output voltage current to avoid PCB damage.
  • When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.
  • Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.
  • Without the written agreement from us, please do not use this PCB for application in medical instruments, emergence devices, auto, airspace vehicles, or other devices that might have impact on human body.

Warning:

  • Because of the very high energy density, Li-ion battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.
 
 
 

product highlights

  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.
  • Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells
  • Protection Circuit Board for 11.1V Li-ion and Li-polymer battery pack.Designed for 11.1V Li-ion or Li-Polymer battery.
  • Prevents 11.1V Li-ion or Li-polymer battery from over-charging, over-discharging.
  • Continuous Discharge Current: 15A.
  • Fully Compatible with both Li-Ion and Li-Polymer cells

Connection Instruction:

  • B+: Connected to the third battery's positive terminal.
  • B1-: Connected to the second battery's positive terminal.
  • B2-: Connected to first the battery's positive terminal.
  • B-: Connected to the first battery's negative terminal.
  • P+: Connected to the battery's output or the charger's positive terminal.
  • P-: Connected to the battery's output or the charger's negative terminal.

Product Specifications:

ItemContentCriterion
Over Charge Protection
  • Over charge detection voltage
  • Over charge release voltage
  • 4.2±0.025V
  • 4.1±0.050V
Over Discharge Protection
  • Over discharge detection voltage
  • Continuous charge current
  • Continuous discharge current
  • 2.5±0.080V
  • 4A
  • 4A
Over Current Protection
  • Over current detection current
  • 15A±3A
Short Circuit Protection
  • Over discharge detection voltage
  • Release condition
  • 8.6±0.300V
  • Disconnect Load
Interior Resistance Main loop electrify resistance ≤70mΩ
Current Consumption Current consume in normal operation ≤100µA
Dimension (L*W*H) 50x17x1mm

Application Notes:

  • Do not subject the PCB to input voltage over 20V. Input voltage over 20V will damage the PCB.
  • Please use the compatible charger for your battery pack; pay special attention to your input and output voltage current to avoid PCB damage.
  • When mixing over-charged batteries and over-discharged batteries together, PCB will be in dual state of over-charging and over-discharging. In this situation, charging and dis-charging are both disabled.
  • Internal static charge protection circuit built into the PCB. However, do not subject the PCB to high static charge to avoid damage.
  • Without the written agreement from us, please do not use this PCB for application in medical instruments, emergence devices, auto, airspace vehicles, or other devices that might have impact on human body.

Warning:

  • Because of the very high energy density, Li-ion battery pack must be connected to a protection circuit module to prevent accidental battery explosion caused by over-charging or over-discharging.