Product Highlights
- Chemistry Li-ion
- Nominal Voltage (V) 7.4
- Capacity (mAh) 2200
- Max Continuous Discharge Current 4A
- Dimension 72 x 38 x 19mm (LxWxT)
- Connector Bare Leads
- Weight 99g
- Light weight and higher energy density than NIMH rechargeable battery .
- Made of 2 2200mAh cylindrical 18650 cells with PCB for full protection.
- Built-in IC chip will prevent battery pack from over charge and over discharge and prolongs battery life .
Features
- Light weight and higher energy density than NIMH rechargeable battery.
- Made of 2 2200mAh cylindrical 18650 cells with PCB for full protection.
- Built-in IC chip will prevent battery pack from over charge and over discharge and prolongs battery life.
output
- Type Pack
- Chemistry Li-ion
- Nominal Voltage (V) 7.4
- Capacity (mAh) 2200
- Max Continuous Discharge Current 4A
- Battery Charging Current
- Standard 0.4A
- Rapid 1A
- Dimension 72 x 38 x 19mm (LxWxT)
- Connector Bare Leads
- Weight 99g
- Avg. Temperature Ranges for
- Charging 32° F~113° F / (0~45°C)
- Discharging 14°F ~140°F / (-10~60°C)
- Storage 32°F ~86°F / (0~30°C)
- PCB/Pack Protection(for single cell voltages)
- Overcharge Protection 4.35 ± 0.025V
- Over-discharge Protection 2.40 ± 0.08V
- Over Current Cutoff (A): 7.5-11.5A
Supported Chargers:
| Item Number | Model/Description | Compatible Packs | Charging Current |
| 01211 | Tenergy TLP-2000 Li-Ion Battery Pack Charger | 3.7V - 14.8V (1-4S) | 0.5A |
| 01281 | Tenergy TLP-4000 Li-Ion Battery Pack Charger | 3.7V - 14.8V (1-4S) | 1.0A |
CAUTION:
- when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mis-handled.
- users should have enough knowledge on Li-Ion rechargeable batteries in charging, and discharging before use.
- we are not responsible for any damage caused by misuse or mishandling of these Li-Ion battery packs.
- it is strongly suggest that you use our Smart Li-Ion battery chargers to recharge the battery pack
- never use conventional DC adapter to charge the battery module - we are NOT responsible for any damage that is caused by improper charging.
- do not make parallel connection with more than three modules to avoid uneven charge.
