Product Highlights
- Chemistry: Li-ion
- Nominal Voltage (V): 3.7V
- Capacity (mAh): 1400
- MOQ: 5000pc
Summarized Features and Benefits:
- Li-Ion 18500 cylindrical rechargeable battery
- 3.7V 1400mAh high capacity, 3 times the Voltage of AA NiMH or NiCd rechargeable battery (1.2V)
- Higher energy density and lower weight than other rechargeable batteries
- Ideal for building power packs for RC Car, plane, robots etc with less cells needed than that NiMH or NiCd batteries
- Manufactured under ISO9001-2000 to assure quality
- Very long cycle life and Rapid battery charge up.
- Battery tested based on International Electrotechnical Commission (IEC) standard to ensure capacity, quality and life time
Technical Specification:
- Chemistry: Li-ion
- Nominal Voltage (V): 3.7V
- Capacity (mAh): 1400
- Max Continuous Discharge Current: 1.3A
- Weight: ~28g
- Dimensions:
- Height: 48.5mm +/- 0.5
- Diameter: 18.2mm +/- 0.2
- Charge Cut-Off Voltage: 4.20 ± 0.05V
- End Voltage: 3.0V
- Internal Impedance: ≤ 80mΩ
Broads Applications:
- RC Applications, car, plane etc
- Safety, Alarm, metering, power backup etc
- Building portable power device that needs high energy density and low weight
Warnings:
- By purchasing Lithium Polymer and Li-ion/LifeP04 battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider NiMH or NiCd battery or return the battery immediately before use.
- Under no circumstances should this battery be used with e-cigarette and flashlights.
- Li-ion/LifeP04 Batteries may explode if charged or discharged improperly.
- You must possess knowledge of electronic and understand how to handle Li-ion battery.
- We reserve the right not to sell and void the warranty it you don't meet the above statement.
- You must use a protection IC (PCB) to keep battery from overcharged and over-discharged
- Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You will solder to tabs instead directly onto the battery.
- Please read additional safety warnings on Li-ion/LiPo batteries