Product Highlights
- Premium protected industrial Li-ion 18650 cylindrical battery.
- Greater than 300 cycle life.
- Locked bill of material (BOM) and production structure.
- Global Safety Standard and a full suite of lab tested certifications.
- Meet your application battery compliant certification requirements immediately.
- 12 months warranty
Features
- Premium protected industrial Li-ion 18650 cylindrical battery
Built with UL1642 certificated cell and internal protection board that provides protection against overcharge, over discharge, over current and short circuit. With the greatest safety standards for household and commercial use during normal and in case of fault conditions of your application. - Greater than 300 cycle life
This battery can be recharged up to 300 + times. The reusability offers significant money savings over time. - Locked bill of material (BOM) and production structure
The list of raw materials, parts, assemblies and the quality of each manufactured battery will be the same standard every time you order, resulting in highest consistence battery performance. - Global Safety Standard and a full suite of lab tested certifications
Tested and certified by the most stringent battery safety standard 3rd party labs accepted globally, ensuring safe transportations and use. Certifications included: TUV (certificated to UL 2054 standard), IEC 62133 CB Scheme, UN 38.3, BIS(cell). - Meet your application battery compliant certification requirements immediately
With our full suite of certifications, this allows you to spec in the pre-certified battery into your new design or existing product avoiding the high certification lab cost and long lead time to certify a new battery choice without a full suite of certifications. - Warranty
12 months - Product Size:
Diameter: 19mm
Length: 69.7mm
Battery Specifications:
- Rated capacity Nominal 2600mAh
- Nominal voltage 3.7V
- Discharge cut-off voltage 2.75V
- Charging voltage 4.2V
- Shipments voltage 3.5-3.65V SOC < = 30%
- Impedance ≤100 mΩ
- Standard charge
- Constant current 0.2C
- Constant voltage 4.2V
- Cut-off current < = 0.02C
- Standard discharge
- Constant current 0.2 C
- End voltage 2.75V
- Maximum Charge Current
- Constant current 0.5 C
- Constant voltage 4.2V
- Cut-off current < = 0.02C
- Fast discharge
- Constant current 0.5C
- End voltage 2.75V
- Maximum continuous discharge current 3.5A
- Operation Charge: 0 to 45 Celsius, 60 +/- 25% R.H
- Temperature range Discharge: -20 to 60 Celsius
- Cycle life 300+ cycles*
- Storage temperature
- < = 1 month: -20 to 50 Celsius
- < = 3 months: -10 to 30 Celsius
- < = 1 year: 0 to 30 Celsius
- Dimension(mm) Φ19+/-0.3 * 70.2+/-0.3
- Weight Approx 50g
*Note:
Charging/discharging in the below condition:
Charge: standard charge
Discharge: 0.2C to 2.75V
Rest time between charge/discharge: 30min
Until the discharge capacity < 80% of NC
Disclaimer:
-*Certifications and Specification are subjected to change without notice
-This product can only be charged with the Tenergy recommended charger. Using another branded charger will void your warranty.
- Only use this product within spec and misusage or using many batteries to build a battery pack will void your warranty.
- Never solder directly onto the Li-ion battery as overheating the battery may lead to an explosion.
- Only use this product within spec and misusage or using many batteries to build a battery pack is not recommended and will void your warranty.
- Under no circumstances should this battery be used with an e-cigarette.
- Li-ion/LifeP04 Batteries may explode if charged or discharged improperly.
- You must possess knowledge of electronic and understand how to handle Li-ion battery.
- The product includes a protection IC (PCB), and will not work with high current draw applications.
- We reserve the right not to sell and void the warranty if you don't meet the above statement.
