product highlights
- Smart Charger with automatic voltage detection. Best for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
- Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 - 2 hours. Current updated Version 2
- Worldwide usage with 120-240V AC.
- Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
- Safety protection fuse for over current, short circuit & reverse polarity protection *Meets UL 60950-1 Safety Standards
- Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
- Universal for any NiMH /NiCd battery packs 7.2V - 12V (6-10 Cells pack)
- Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 - 2 hours.
- Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh.
- Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
- Smart Charger with automatic voltage detection.
- Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life.
- Red LED will be on during charging.
- Automatically charging ending with negative delta V.
- 4 hour safety timer: Charger will stop charging after 4 hours of operation.
- Worldwide usage with 120-240V AC
- With Temperature sensor
Includes:
- 1 standard Tamiya connector.
- 1 connector adapter from standard Tamiya to Mini Tamiya.
- 1 set of alligator clip adapter with standard Tamiya connector on one end.
- 1 Temperature sensor
Specifications:
- FOR 7.2V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
- Input: AC100-240V
- Output: 7.2-12V 0.9or1.8A
Operation Instruction:
- Connect battery pack to output connector and plug AC power source.
- Make sure battery polarity is connected correctly (Red wire is positive)
- Charger will detect battery voltage automatically, Red LED will be on during charging
- When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
- Battery will be charged at 0.9A or 1.8A constant current,
- Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
- The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
- Don't charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh.
- Battery pack must be made by high drain current cell.
- Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.
Tenergy 8.4v 1600mAh NiMH Flat Battery Pack (for Airsoft Gun):
- Product 8.4V 1600mAh NiMH Flat Battery Pack
- Make Made of 2/3A x 7 cells
- Connector Mini Tamiya FeMale connector assembled with 16 G wire
- Fit Models Most Airsoft Mini AK series, upgraded and/or modified AEG's
- Feature Rapidly charge ande had a long life cycle span
- Weight 5.3 Oz
- Dimensions 104 mm (Length);35 mm (Width); 18.5mm (Height)
- Recommended Charger Smart Universal Battery Pack Charger
- Use attention Set charging current to 0.9A when charging with the above charger
Warnings:
- The charger is designed for indoor use only. Don't leave the charger unattended during charging.
- The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
- Don't cover the charger when charging, ambient temperature shall not be more than 40oC
- Don't touch the plug.
- Don't leave the batteries and chargers on wood surface or carpet.
- Cut off the power supply before connect or disconnect the charger with batteries.
- Don't try to disassemble the charger, High voltage inside, danger!